BigShowOffs Easy Installation Guide
1. Before starting the installation, it’s a good idea to remove your BigShowoffs from the packing, unroll, and let it adapt to room temperature for approximately 30 minutes.
2. Simply locate the wall or surface in which you would like to place your BigShowoffs Custom Life Size Wall Graphic. Wipe down the installation surface with a slightly damp cloth (use water only) and allow the area to dry. A clean surface insures your BigShowoffs will last for years and will allow you to relocate the graphic at a later time.
3. Installing BigShowoffs is easy so not to worry, it’s removable and re-positional. It always helps to have an extra set of hands around to assist in the installation.
4. It’s a good idea to hold your custom wall graphic up again the installation surface with the backing on to get a good idea of the exact location of placement.
5. Once you’ve determined the location for placement, slowly begin to remove the backing from the top down if the wall graphic is taller than wider or from left to right if the wall graphic is wider than taller. Lightly press the BigShowoff from the center to the outer edges of the surface as you remove the backing.
6. Now that you have removed the backing and lightly attached the wall graphic in place, it’s time to remove any air bubbles by applying pressure with the hands and rubbing from the center to the outer edges. It’s not a bad idea to save the backing material in the event you need to store your BigShowoffs.
7. Finally, it’s time to enjoy your BigShowOff custom wall graphic. |
0 items
